Read-only demo · data resets nightly Install SOPandGO
View as

Lab Waste Segregation (Demo)

published Version 1 11/20/2026, 2:42:54 PM

Initial release

Document

Lab Waste Segregation (Demo)

1. Purpose

This procedure describes which waste goes into which container.

2. Scope

All waste produced in the lab rooms.

Disclaimer: This is a demonstrational document only and should not be used for actual laboratory work without verification by qualified personnel and adherence to local waste regulations.

3. Responsibilities

  • Everyone sorts their own waste at the bench.
  • The lab manager arranges pickup of full containers.

4. Waste Streams

Waste Examples Container
Sharps Needles, scalpels, broken glass Yellow puncture-proof box
Biological Cultures, contaminated tips and plates Autoclave bag, then general waste after autoclaving
Chemical, liquid Solvents, staining solutions Labeled canister in the fume hood
Chemical, solid Contaminated gels, absorbents Labeled solid chemical waste bin
General Packaging, clean paper towels Regular bin

5. Rules

  1. Never mix halogenated and non-halogenated solvents.
  2. Close all containers when you are not adding waste.
  3. Replace sharps boxes when they are three-quarters full.
  4. Label every chemical waste container with its contents and the start date.
  5. If you are unsure, ask the lab manager before you dispose of anything.